How To Make Pleated Face Mask With Filter
How To Make Pleated Face Mask With Filter. Align the right sides of the rectangle pieces and sew all four sides with a ¼” seam allowance leaving a 3” gap opening. The reinforced pipe cleaner at the top helps the mask to fit snugly around the nose and cheeks.
The pocket for an optional, removable filter, for additional filtration, is at the bottom inside of the mask. Turn the face mask inside out and press the edges flat with an iron. So, it’s perfect for the whole family!
Sew the ends of the elastics to the short ends of one rectangular piece (on the right side of the fabric) forming loops.
Click here to go and download your face mask. Cut two layers of cotton fabric: As more of us are looking to make our own fabric masks to wear in public to help prevent the spread of the covid19 virus, there are a couple of typical types.
Fold the raised fabric downward and pin it.
April 03, 2020 19 comments. Colorful print for the outside and a plain/muslin for the inside. Cut an oval slightly smaller than mask, about 6.5” x 4.5” and insert in the pocket.
Add the other side, which should overlap the other back piece about 1″ or so total.
(don’t forget to remove disposable filter before washing mask.) to create a snug fit around bottom of chin, you can fold small pleats at bottom of mask. With right sides together, begin sewing from what will be the top of the face mask, using 1/4 seam allowance and leaving a 3 opening in the middle (where you will insert the removable filter), along the folded edges of the fabric. Follow along with these instructions to make a pleated fabric face mask complete with casings for the drawstrings or elastic and a filter pocket.
Fold the rectangle in half (wrong sides together) with the hemmed edges together and press the fold at the top.
Using an iron and pressing as you go, fold the strip up so that the raw edge lies 1/8 inch away from the top of the other raw edge. The pocket for an optional, removable filter, for additional filtration, is at the bottom inside of the mask. (don’t forget to remove disposable filter before washing mask.)
This will result in an approx.
Place one of the back pieces right sides together with the exterior and sew (1/4″ seam allowance). In the hoop pleated face mask with filter pocket. Mask, about 6.5” x 4.5” and insert in the pocket.
Comments
Post a Comment